產品簡介
1、 , , 本專利產品為加工企業提供最即時的靜電防護情況，確實解決現在加工廠靜電防護的盲點。
2、可為加工企業解決因靜電所造成的不良率情況，降低加工企業成本以及簡化管理流程、人力資源浪費等問題。
3、本專利產品運用主控IC偵測電路，依電位差以及靜電回路等方式即時偵測靜電防護是否正常。並以燈號與警報聲響告知使用者。
Product Description:
1. , , This patented product offers real-time electrostatic discharge protection (ESDP) to electronic manufacturers’ facilities where some ESDP problems currently exist, which can be solved if this product is introduced.
2. , , This product can reduce the defect rate of electronic manufactures, lower their cost and waste of human resources and streamline their management flow.
3. , , This product adopts an IC sensor circuit, which detects whether the ESDP system of a manufacturer is working properly by means of monitoring the electric potential difference and electrostatic circuit. The product will alarm a user through the lamp and sound annunciator equipped, if there is any abnormal situation occurred.
產品優勢
1、立即性、可靠性、準確性的新時代靜電防護專利產品。
2、節能方面:本公司因應本產品低電耗的產品性，另外開發專屬的電源擴充線。一個電源變壓器可推動30組的偵測型靜電環產品，等於說一組工作桌只需一顆電源變壓器即可。
Advantages:
1. , , This is a new generation of ESDP patented product with instant, reliable, and accurate response.
2. , , Energy saving: We have developed a dedicated power cord, with which a transformer can drive up to 30 sets of detective static rings. This means that each working table at a workshop only needs one transformer.
產品功能
1、接地傳導線斷開時，將立即以燈光及警報聲告知。
2、車間接地線開路時，將立即以燈光及警報聲告知。
3、佩帶不當導致與人體接觸不良時，將立即以燈光及警報聲告知。
4、工作人員的靜電防護回路開路時，將立即以燈光及警報聲告知使用者。
Functions:
1. , , The product will alarm in both lighting and sound as soon as the ground conducting wire is not connected.
2. , , The product will alarm in both lighting and sound immediately after the workshop ground wire is broken.
3. , , Once the antistatic wearing is in poor contact with human body, the product will alarm in lighting and sound.
4. , , Once there is any disconnection in the circuit of the antistatic shield of operators, the product will alarm in lighting and sound.
電子加工廠的靜電防護之盲點
一、無法立即得知靜電防護是否正常運作。
二、既使傳統型靜電環通過車間外的檢測，進入車間後無法立即得知靜電環是否正常工作。
三、車間工作人員對靜電防護產品操作不當，造成靜電防護失效。
四、加工廠對靜電防護流於形式應付了事以及檢測不確實等敷衍情況。而造成不良率上升。
五、因為無法立即得知工作人員靜電防護情況，盲目添加靜電防護產品，造成人員與公司成本的負擔。
六、因擔心人員工作中靜電防護失效，每二個小時對傳統型靜電環檢測一次，而造成人力資源上的浪費以及增加管理流程的麻煩。
Current Antistatic Problems at Electronic Manufacturers’ Facilities:
1. , , Whether an ESDP system is in the normal working condition or not is not available instantly.
2. , , Even if the traditional electrostatic rings can pass the test outside of a workshop, whether they are working properly inside is not immediately available.
3. , , Operators’ maloperation to the ESDP system may result in malfunction of the system.
4. , , Perfunctory treatment and test to the ESDP system lead to the increase of the defect rate.
5. , , Blindly adopt more ESDP products due to inability to instantly know operators’ ESDP conditions, thus inviting more cost burdens on the manufacturer and more troubles on relevant technicians.
6. , , Because there is a concern that the ESDP system may become ineffective during a working process, the traditional electrostatic rings have to be checked every two hours. This causes the waste of human resources and increases troubles in the management flow.